quick start – embeddedTS Blog

Practical Guide to Getting Started with the TS-4100

This practical guide gives us an opportunity to take a relaxed approach to getting started with the TS-4100 computer. We’re going to take a look at how to make our first connections, and setup the network. These are usually the first things we do before starting development. In the grand scheme of things, this is just a friendlier extrapolation from the official TS-4100 manual, so be sure to keep it handy for more advanced topics and specific details. The only assumption being made is that you’ve purchased the TS-4100 with a development kit, including the pre-programmed microSD card and TS-8551 reference board. Right then, let’s get started! Home

Continue reading “Practical Guide to Getting Started with the TS-4100”

Practical Guide to Getting Started with the TS-7800-V2

This practical guide gives us an opportunity to take a relaxed approach to getting started with the TS-7800-V2 single board computer. We’re going to take a look at how to make our first connections, and setup the network. These are usually the first things we do before starting development. In the grand scheme of things, this is just a friendlier extrapolation from the official TS-7800-V2 manual, so be sure to keep it handy for more advanced topics and specific details. The only assumption being made is that you’ve purchased the TS-7800-V2 with a development kit, including the pre-programmed microSD card and necessary cables. Home

For you TS-7800 users upgrading to the TS-7800-V2, you’re in for a treat. There’s a migration guide specifically created to help you with some of the nuances in upgrading. For this, take a look at the “Migration Path” section of the TS-7800-V2 Manual.

When you’ve finished, be sure take a look at PWM Primer with the TS-7800-V2. Good stuff there about working with dimming LEDs and controlling servo motors.

Right then, let’s get started! Continue reading “Practical Guide to Getting Started with the TS-7800-V2”

Practical Guide to Getting Started with the TS-7670

This practical guide gives us an opportunity to take a relaxed approach to getting started with the TS-7670 single board computer. We’re going to take a look at how to make our first connections, and setup the network. These are usually the first things we do before starting development. In the grand scheme of things, this is just a friendlier extrapolation from the official TS-7670 manual, so be sure to keep it handy for more advanced topics and specific details. The only assumption being made is that you’ve purchased the TS-7670 with a development kit, including the pre-programmed microSD card. Right then, let’s get started! Home

Continue reading “Practical Guide to Getting Started with the TS-7670”

Practical Guide to Getting Started With the TS-7553-V2

This practical guide gives us an opportunity to take a relaxed approach to getting started with the TS-7553-V2 single board computer. We’re going to take a look at how to make our first connections, and setup the network. These are usually the first things we do before starting development. In the grand scheme of things, this is just a friendlier extrapolation from the official TS-7553-V2 manual, so be sure to keep it handy for more advanced topics and specific details. The only assumption being made is that you’ve purchased the TS-7553-V2 with a development kit, including the pre-programmed microSD card and enclosure with 128×64 px LCD and 4 button keypad. Right then, let’s get started!

By the way… there’s also a video tutorial on getting started as well! See it here:

https://www.youtube.com/watch?v=E_0qanH3vTA Home

Continue reading “Practical Guide to Getting Started With the TS-7553-V2”

Practical Guide to Getting Started with the TS-7600

This practical guide gives us an opportunity to take a relaxed approach to getting started with the TS-7600 single board computer paired with the TS-ENC750 enclosure with TS-752 baseboard. We’re going to take a look at how to make our first connections, talk about the Linux environment, and setup the network. These are usually the first things we do before starting development. In the grand scheme of things, this is just a friendlier extrapolation from the official TS-7600 manual, so be sure to keep it handy for more advanced topics and specific details. The only assumption being made is that you’ve purchased the TS-7600 with a development kit, including the pre-programmed microSD card and TS-ENC750 and TS-752 baseboard. Right then, let’s get started!

Continue reading “Practical Guide to Getting Started with the TS-7600”

Practical Guide to Getting Started with the TS-TPC-7990

Introduction

The goal of this practical guide is to get you through the basic steps of getting your TS-TPC-7990 up and running so you can begin development. It’s mostly an extrapolation of the official TS-TPC-7900 Manual, but provides a more practical and casual approach in setting up connection, networking, and general development environment. Home

Continue reading “Practical Guide to Getting Started with the TS-TPC-7990”

Practical Guide to Getting Started with the TS-7400-V2

Introduction

This guide aims to get you through the basic steps of getting your TS-7400-V2 up and running so you can begin development. It’s mostly an extrapolation of the official TS-7400-V2 Manual, but provides a more practical and casual approach in setting up connections, networking, and general environment.

Continue reading “Practical Guide to Getting Started with the TS-7400-V2”

Practical Guide to Getting Started with the TS-7680

Introduction

This guide will walk you through the basic steps of getting your TS-7680 up and running. It’s mostly an extrapolation from the official TS-7680 Manual, but provides a more practical and casual approach in setting up common connections, networking, and environments to begin development.

Continue reading “Practical Guide to Getting Started with the TS-7680”

Practical Guide to Getting Started with the TS-7970

Introduction

This guide will walk you through the basic steps of getting your TS-7970 up and running. It’s mostly an extrapolation from the official TS-7970 Manual, but provides a more practical and casual approach in setting up common connections, networking, and environments to begin development.

Continue reading “Practical Guide to Getting Started with the TS-7970”

Practical Guide to Getting Started with the TS-TPC-8390-4900

Introduction

This guide will walk you through the basic steps of getting your TS-TPC-8390-4900 touch panel computer (TPC) up and running. It’s mostly an extrapolation from the official TS-TPC-8390-4900 Manual, but provides a more practical approach in setting up common connections, networking, and environments to begin development. We’ll assume you’ve already gone through the excitement of unboxing, and we’ll pick up from there.

Connections

Let’s get our TS-TPC-8390-4900 hooked up! This includes our very basic connections we’ll need for most any development or project: power, serial console, Ethernet, and optionally a keyboard and mouse.

Continue reading “Practical Guide to Getting Started with the TS-TPC-8390-4900”